How do you define mold?
The fungi are microscopic and grow by spores. Most likely, you've experienced at least one black or greenish spot of mold, either inside the house (on wall surfaces, or in bathrooms in areas of high humidity) or on food items.
The scientific names of molds that are commonly present at home are Cladosporium, Penicillium, Alternaria and Aspergillus.
The ideal setting to encourage the growth of mold is portrayed by the presence of humid as well as warm temperatures .
What is the cause of the growth of mold?
The many sources of mold are the following:
Humidity inside the house
Inadequate ventilation;
Condensation that appears on walls or windows;
Inequal heating in the rooms.
Factors that enhance that appearance
Geothermal heating insulation joinery (double glazing) Double glazing joinery can enhance that appearance of condensation and can therefore contribute to the growth of mold. These windows are extremely beneficial as they stop the loss of heat. They also hinder the circulation of air. This is why the home should be well-ventilated on a regular basis.
The moisture that builds up inside the house, specifically in the kitchen as well as inside the bathroom (from showering or cooking) is among the primary factors leading to the development of mold.
Insufficient heating is an important factor in the growth of mold. Heating does not eliminate the moisture from the room, however it does increase the capacity of air to hold more moisture in the form of vapor (without condensation) in the event that an area is heated and later cooled, but without ventilating or venting. In one way or the other, the humidity of the atmosphere will get affected to the possibility of mold or dampness.
Allergies can be caused by mold.
The presence of mold can have many negative effects on your health which is especially dangerous for children. Some of the symptoms of mold allergy are:
nasal runny nose
Sneezing and coughing
an irritation sensation in the throat. Or pressure inside the chest
The wheezing and the breathing issues
tear, redness and irritation of the eyes, and burning appearance to the eyes
Eczema and irritations of the skin
fatigue, headache.
How do we eliminate the moisture or mold?
If we've identified the cause of dampness or mold the ground, we must determine how we can eliminate this uncomfortable issue.
Tips to rid yourself of mold:
Insulate every room of the home twice daily
The bathroom's mold occurs precisely because the humidity in the space is very high. After every shower or bath, you should leave the window open , and keep the light on for couple of minutes (darkness helps to improve the appearance)
Clean the kitchen thoroughly Cleanse the stove as well as the walls adjacent to it thoroughly (grease staining creates a great setting for the growth of mold) Do not let food to spoil. Discard any food items that have expired.
Dry clothes outside the home
Do not put rugs made of textiles on the bathroom floor.
Use a dehumidifier.
Moisture in the home is also caused through cold water pipes when the temperature differential is significant.
What is the best way to clean it and what products to remove the mold?
In trade you will get a range of ways to get rid of mold. Below we will outline some of the safest and efficient methods.
1. A custom-made solution that is made up of chlorine
Make a mixture of one-third bleach and four parts of water
Spray the solution over the area affected
The mold should be rubbed with the brush
Cleanse the area using a damp cloth, and then dry it.
2. A recipe for homemade solutions made with ingredients that you already have in your kitchen:
100 ml vinegar
100ml water
10 ml hydrogen peroxide (hydrogen peroxide)
Lemon juice
2 teaspoons baking soda.
Dehumidifiers are safe to eliminate water and mould.
The humidity inside a home is supposed to be between 40 and 60%. If it is higher than 60%, it is a significant increase in the risk of moldgrowth, and a humidity over 80 percent is definitely an environment that can facilitate the growth of mold.
There are many dehumidifiers available that are able to deal with moisture and mold problems.
We would recommend it!
If you are renovating your bathroom or home it is recommended to be aware of the use of ventilation to ensure air circulation. Make sure to include anti-mold ingredients to the mortar to ensure greater effectiveness in preventing the appearance and growth of mould.
What can we do to help you?
When there are issues due to heating issues We can help by contacting certified installers who can set up heating elements to match the intended surface.