top of page
  • Writer's pictureAbu Hurara

Why Does My Shower Take So Long To Get Hot Water?


When your shower takes too much time to heat up the water, it is a little annoying. When you shower in the morning, you feel comfortable and relaxed, but you irritate when the hot water takes time to come from the shower. You might think you require a new water heater, but supposing your water is still in a good position, we have another excellent solution to this problem. Now, we will discuss why a shower takes time to get hot water.

Why Is The Hot Water Taking So Long?

The distance from the water heater, the diameter of the pipe, and the flowing water of water are some reasons for taking time for hot water to come from the shower, for big houses when the flow of hot water is fast so that it takes a long time to heat up the shower faucet. The water that is currently in the pipe is also one reason for a delay in hot water. All the cooled off water in the pipes has to move out before the hot water comes to the shower when you are waiting for the hot water.

Size Of Pipe

The size of the pipe is also one of the reasons for the delay of hot water in the shower. The bigger and wider the line, the longer it takes for hot water to come to your shower. The flow rate of the shower also affects the delay for the hot water. It affects how rapidly the cooled water remains in the pipes is evacuated; this is particularly right with water-conserving bathroom showers and showerheads. If your shower is taking all-time heat up, take notice of it. You can contact emergency plumbing services in Russellville, Arkansas, in case of any emergency. They will adequately instruct you on what to do in that situation.

A Failing Water Heater

Sometimes hot water takes so long to come from the shower because of the fail water system. The perfect working of water heater is mostly about ten years old after this age water heaters do not work correctly. They approach the end of their service life. They are less effective as compared to new water heaters. An expert plumber from Arkansas can check out and repair your water heater. You can contact the best plumbers in Russellville, Arkansas. In case of any problem, they will tell you the right time for the water heater replacement.

Sediment Buildup

Sediments collect in your water heater when the minerals that dissolve like magnesium as calcium settle on the bottom of the hearer or tank, shortly where the elements of the electric heater are located. When there is a layer of sediments in the tank, it blocks the flow of the hot water. Hot water cannot generate by the tank as rapidly as it used to be. A professional plumber from Russellville, Arkansas, can flush your water heater and remove the particles to help improve the efficiency of the water heater tank.

A Low Volume Restrictor

You probably fix the low volume restrictor on fixtures, like your shower, which can take time to get the hot water. The low volume restrictor is also the reason for the hot water delay to get from the shower.


The distance of the water heater from the shower matters when you want to get hot water from the shower. If the heater is away from the shower, it will take time to get hot water, but if the water heater is close to the shower, then you can get hot water rapidly.

How Can You Get Hot Water Rapidly

You can get hot water from the shower rapidly by two processes the first is a recirculation pump, and the second is a retrofit system. A recirculation pump can minimize the amount of water wasted while you are waiting for water to heat up.

Recirculation Pump

A whole hot water recirculation and retrofit system are two types. The recirculation system has a hot water line that flows back to your loop from your fixture, generating hot water. Recirculation pumps are the most energy-efficient. A recirculating system:

  • Flow water more rapidly from the hot water heater to the tap.

  • Is activated by a thermostat or a timer.

  • Keep hot water near to the shower and recirculate your used water back to the heater.

Retrofit System

A pump is attached to the hot water outlet side of the water heater, and the valve is fixed at the next point in the retrofit system. This system permits the hot water to enter into the cold water system. The cold water system is usually known as stacking. It is not much energy-efficient as the recirculation pump. It is not expansive, but the recirculation pump is an expansive one. You can get similar results from the retrofit system which you get from the recirculation pump.

1,138 views0 comments
bottom of page